Fast-dry performance
Evaporation profile supports quick turnaround and reduces water-rinse dependency (grade dependent).
Product Industrial Cleaning
Non-Chlorinated Solvent Cleaner
Non-chlorinated solvent blend for fast-dry cleaning of oils, greases, and adhesive residues — built for wipe-down, spray, or parts-cleaning workflows (process dependent).
Packaging: drums / IBC / bulk (as applicable)
Documentation: SDS / COA / TDS on request
Grade options: fast-dry / higher flash point (per inquiry)
Designed for low residue and quick evaporation (grade dependent)
Targets: oils, greases, adhesive residues, inks/markers, light soils
Selection depends on substrate, safety rules, and ventilation
Important: Solvent cleaners are typically flammable and require appropriate handling, storage, and local compliance. Confirm your EHS constraints during inquiry.
Designed for fast, practical cleaning
Non-chlorinated solvent cleaners are often selected when you need rapid oil removal and fast rework/assembly. Typical workflows include wipe-down before bonding/painting, parts cleaning, and residue removal from maintenance and repair tasks. Grade choice should balance evaporation rate, flash point, odor, residue limits, and substrate compatibility.
Residue control
Formulated to minimize residues that can interfere with coating, bonding, or inspection (grade dependent).
Procurement-ready
Consistent specification lane with SDS/COA/TDS routing for repeat orders.
Adhesive residue
Useful for removing tape/glue residues in maintenance and packaging operations (surface dependent).
Oil & grease removal
Common for removing machining oils and handling soils prior to downstream operations.
Process fit
Select for wipe, spray, immersion, or recirculating parts washers (method dependent).
*Performance and safety characteristics vary by grade. Provide your requirements (flash point, odor, residue tolerance) for best-fit selection.
Applications
Typical usage patterns. Tell us your process and constraints and we’ll align the right specification.
- Fast wipe-down degreasing before coating, bonding, or inspection
- Adhesive and label residue removal in maintenance/packaging areas
- Parts cleaning for tools, fixtures, and assemblies (process dependent)
- Maintenance cleaning for equipment and hard-to-rinse areas
Surface compatibility
Some plastics, rubbers, and coatings can soften or haze. Share substrates so we can select a safer grade.
Evaporation vs safety
Faster-dry solvents can increase flammability and VOC considerations. Higher-flash options may be preferred in some sites.
Residue management
If downstream steps are sensitive (painting/bonding), specify “no film” requirements so we can prioritize low-residue grades.
Typical specifications & formats
Values depend on grade and customer requirements. Confirm details on quotation and SDS/COA/TDS.
Type
Non-chlorinated solvent blend (grade options available)
Drying profile
Fast-dry to controlled-dry (selected by process)
Residue profile
Low residue / low film potential (grade dependent)
Flash point lane
Varies by grade; specify your safety/EHS requirements
Use method
Wipe, spray, immersion, parts washer (method dependent)
Selection inputs
Soil type, substrate sensitivity, residue limit, safety constraints
Packaging
Drums, IBC, bulk (as applicable)
Documentation
SDS / COA standard; TDS on request
Customization
Evaporation/flash point/residue balance per process lane
Handling note
Use appropriate PPE and ensure adequate ventilation. Confirm site rules for storage, grounding, and ignition control.
Compatibility note
Always test on sensitive plastics, coatings, and elastomers before full-scale use. Share materials for safer grade selection.
Process note
If used before painting/bonding, specify your cleanliness criteria so we can prioritize low-film grades.
Specifications may vary depending on batch, origin, and packaging selection.
Request a quotation
We quote against a defined grade lane, packaging, destination, and documentation needs. If you share your substrates and flash point constraints, we can propose suitable options faster.
For maintenance teams
Specify residue and dry-time needs for quick turnaround during repair work.
For production
Share downstream process sensitivity (paint/bond/inspection) to align low-film selection.
For procurement
Provide monthly usage, packaging, and destination for an actionable offer.