Flexible formats
Solution or solid grades depending on site handling, storage capacity, and dosing design.
Product Water Treatment
Chlorine Dioxide Precursor (Sodium Chlorite)
Precursor feed chemical used in chlorine dioxide (ClO₂) generation systems for disinfection and oxidation programs in municipal and industrial water treatment.
Formats: solution or solid grades (per inquiry)
Packaging: drums / IBC / bulk (as applicable)
Documentation: SDS / COA / TDS on request
Why customers choose sodium chlorite
Chlorine dioxide programs are often selected where sites need a strong oxidant/disinfectant performance profile and controlled on-site dosing. Sodium chlorite is the key feed chemical for many generation systems, so consistent assay, low impurities, and reliable packaging are critical for stable operation and repeat procurement.
- Supply aligned to generator operation (stable assay, documented QC)
- Packaging built for safe handling and predictable logistics
- Support for qualification, documentation, and reorder continuity
Commercial overview
Atlas Global Trading Co. supplies sodium chlorite as a procurement-ready lane for chlorine dioxide programs. We align grade, packaging, and documentation so your operations and EHS teams can qualify the product and reorder reliably. Share your generator type, consumption, and destination so we can propose the correct offer.
Repeat procurement
Pack sizes aligned to consumption—drums for lower draw, IBC/bulk for continuous programs.
Documentation set
SDS/COA available on request; TDS and additional QC parameters can be included where required.
Typical buyer requirements
Sodium chlorite performance in generator systems is often driven by assay consistency and impurity control. Many customers request limits for chlorate, chloride, alkalinity, and trace metals, plus packaging that supports safe unloading and storage.
- Confirm assay/active content and QC limits needed for your system
- Confirm packaging interface (drum pump, IBC valve type, bulk unloading)
- Confirm destination and documentation for transport/compliance
Applications
Sodium chlorite is used as the feed chemical in chlorine dioxide generation systems, where the generated oxidant is then dosed into water or process streams for disinfection and oxidation (application dependent). Typical use cases include:
- Municipal drinking water and distribution system disinfection programs
- Industrial process water treatment and biofouling control (site-specific)
- Cooling tower and recirculating water sanitation programs
- Wastewater odor control and oxidation steps (application dependent)
- Food & beverage water systems and utilities (qualification dependent)
System integration notes
Generator systems vary by design, automation, and feed requirements. To avoid supply mismatches, confirm the format, concentration, and packaging interface your system expects. If you share your operating constraints (storage temperature, transfer method, container connection), we can align the recommended supply configuration.
- Choose packaging to match your transfer method (pump/valve/unloading)
- Confirm storage conditions and site EHS requirements for oxidizers
- Confirm documentation (SDS/COA/TDS) needed for qualification and auditing
Typical specifications & formats
Values depend on grade and customer requirements. Confirm final specification on quotation and COA. Sodium chlorite may be supplied as a stabilized aqueous solution or as a solid grade depending on your program needs.
Format
Solution or solid (per inquiry)
Assay / active content
Grade-dependent; confirm on offer/COA
Appearance
Solution: clear to pale yellow; solid: white to off-white (grade dependent)
Packaging
Drums, IBC, bulk (as applicable)
Documentation
SDS / COA / TDS available on request
Quality options
Multiple sourcing lanes and QC profiles available
Common QC items requested by operators
Many systems specify limits to support stable generation performance and minimize by-product formation (requirements vary by application and regulator). If you share your target spec, we can align sourcing accordingly.
- Active content (assay) and concentration tolerances
- Impurity profile (chlorate/chloride), alkalinity/pH (solution grades)
- Trace metals (e.g., iron) where sensitive equipment is used
- Certificate of Analysis (batch COA) and traceability details
Specifications may vary depending on batch, origin, and packaging selection. Offer + SDS/COA/TDS are controlling documents.
FAQ
Common questions from operations, EHS, and procurement teams.
Do you supply solution or solid?
Both are possible depending on supply lane and customer requirements. Many generator systems use solution grades for simplified dosing, while some sites prefer solid for specific logistics or storage constraints (program dependent).
What packaging is available?
Typical options include drums and IBC, with bulk available in certain lanes and destinations. Share your unloading/connection requirements so we match the right pack.
What documents can you provide?
SDS and COA are available on request. TDS and additional QC parameters can be included depending on grade and customer requirements.
Can you meet a specific QC limit?
Often yes, depending on the sourcing lane and grade. Send your target specification (assay, impurity limits, metals) and we’ll propose the closest match.
Is it compatible with my generator?
Generator designs vary. Confirm your system’s expected feed format, concentration, and container interface. If you provide these details, we can align the offer accordingly.
Any special handling considerations?
Sodium chlorite is an oxidizer and should be handled per SDS and site EHS procedures. Avoid contamination and incompatible materials; use dedicated transfer equipment where required.